Laundry Guide - Kenmore HE2PLUS 110.4751 Use And Care Manual

Temperature Guide
Wash Water Temperature
HOT
WARM
COLD
In wash water temperatures colder than 60°F (15.6°C),
detergents do not dissolve well. Soils may be difficult to remove.
Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available to each of these
washer cycles.
CYCLE SUGGESTED LOAD TYPE
Whitest Whites Soiled white fabrics
Heavy Duty Heavily soiled underwear, towels, shirts, etc., made
of cotton
Normal/Casual Normally soiled blouses, shirts, overalls, etc., made
of polyester, nylon, cotton, linen, or cotton blends
Express Wash Small loads of 2-3 lightly soiled cotton, polyester,
nylon, and cotton blends.
Delicate Curtains and delicate clothing, dresses, skirts, shirts
and blouses
Rinse/Drain & Spin All loads
Clean Washer No clothes
18
Suggested Fabrics
Whites and pastels
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed or fade
Light soils

Laundry Guide

Auto Temp Control
ATC (Auto Temp Control) electronically senses and maintains a
uniform water temperature. ATC regulates incoming hot and cold
water. The ATC is automatically turned ON when a cycle is
selected. See Preset Cycle Settings table in "Cycles."
ATC works for the wash temperature with Warm/Warm,
Warm/Cold, and Cold/Cold settings.
ATC works for the rinse temperature with the Warm/Warm
setting.
The Cold rinse temperatures depend on the cold water at
your faucet.
AVAILABLE OPTIONS
Delay Start Prewash 2nd Rinse Cycle Signal