Necessary Adjustments When Parts Are Replaced; D300 Adjustment Software And Updates - Nikon D300 Repair Manual

Necessary adjustments when parts are replaced

1. D300 adjustment software and updates

Adjustments
Writing of
EEPROM
Replacement parts
＊ 1
Shutter unit
＊ 2
Main PCB unit
AF FPC unit
Top cover or
SB lower case unit
DCDCAK
base plate unit
DCDCSZ
base plate unit
Metering FPC unit
I base plate unit
＊ 1.When the shutter is replaced, make the image shutter adjustment by using the image adjustment software.
＊ 2.When the main PCB unit is replaced, be sure to update the version before writing the fixed values.
△ (Revision) update the firmware after "writing of fixed value", and then perform "writing of fixed value" again.
＊ 3.Make the inspection.
Changed Page △ ×1
AE
AE CCD accuracy
positioning inspection &
fixed
adjustment adjustment
values
＊ 3
○ △ ○
○ ○
- Ａ 40 ・
Aperture Built-in SB Battery
accuracy light volume check volt-
inspection inspection & age level
adjustment adjustment
○ ○ ○
○
○
○
-
logo Q0310 forGraphic
070509 Gdesign ito
INC
VBA20001-R.3720.A
AF
accuracy
inspection &
adjustment
○
○
サービス
計画課
Ｍ
Feb.1st.2008