Nikon D300 Repair Manual page 52

⑨ Attach the metering �PC unit with three screws (#883) without tightening up them. Then give each screw
one and half turns. By following the instructions of PC, adjust the position of "AE-CCD" with the screws
(#883 , and #883
② ③
#883×3
②
Turn the screw
clockwise.
③
Y�a�is direction
Turn the screw
counter-
③
clockwise.
Turn the screw
clockwise.
②
⑩ ��i� the three screws (#883) with the
screwlock.
⑪ After completing the adjustment, fi� the top cover with the screw and inspect the accuracy. �f the result is
out of standard, make readjustment.
).
③
・Because the screw
①
Output of AE CCD
X�a�is direction
Turn the screw
counter-
②
clockwise.
- Ａ  ・
Screw (#883) ①・・・Reference screw
Screw (#883) ②・・・X�a�is direction
Screw (#883) ③・・・Y�a�is direction
is the reference screw, do �OT rotate it
①
for adjustments unless absolutely necessary.
Adhesive: Screwlock
-
logo Q0310 forGraphic
070509 Gdesign ito
INC
VBA20001-R.3720.A