Shutter unit
・With the shutter unit (#31) charged (ready for releasing the shutter),
assemble it into the body.
・Attach the conduction plate (#398).
・Tighten two screws (#1611)
and one screw (#1541) (in
numeric order from
to
.)
①
③
・Attach [#398]
firmly with the tape
(#956).
Charge base plate unit
・ Confirm that the shutter unit (#31) is
charged and the mirror-charge lever
and shutter-charge lever are at the
initial position.
・Mount the charge base plate unit (#B16620)
on the body.
・While positioning [#B16620] by turning
counterclock, tighten three screws (#1573)
and one screw (#1572) in numeric order
from
to
④ .
①
※ Direction for positioning [#B16620]
#31(1)
#1573×3
#1572
②
④
③
①
- A ・
-
logo Q0310 forGraphic
070509 Gdesign ito
INC
VBA20001-R.3720.A
Position for attaching [#956]
#956
#398
③
#1541
②
#1611
※ Shutter charge
①
Perform shutter charge
#1611
by moving the lever
in the direction of the
arrow.
#B16620
※ Initial position for charge lever
Shutter charge
lever
Mirror charge
lever