Nikon D300 Repair Manual page 48

Image sensor holder unit
・Mount the DR base plate (#1014) on the body, and tighten two screws (#1541).
・Connect the �PC (#1045) to the connector of [#1014].
・Mount the image sensor holder unit (#B10521) on the body.
・Position [#B10521] in the direction of the arrow, and tighten three screws (#1639).
・Solder the wires of [#B10521] on [#1014].
C� base plate unit
・Connect the harness (#1074) to the connector of the DCDCSZ base plate (#1048).
・Connect the �PC (#1038) to the connector of the C� base plate (#1018).
・Mount the C� base plate (#1018) on the body, and tighten three screws (#1543).
#1048
#1074
DR base plate
(#1014)
Image sensor holder
unit (#B10521)
#1639×3
#1038
- Ａ  ・ -
logo Q0310 forGraphic
070509 Gdesign ito
INC
VBA20001-R.3720.A
#1541
#1045
#1014
Red
#1541
Black
Gray
Orange
Image sensor holder unit
#1543×3
#1018