Front Cover Unit - Nikon D300 Repair Manual

�ront cover, Bayonet and other small parts
#1527
�ront cover unit
・While releasing the aperture-coupled ring
(#406) counterclockwise, mount the front
cover (#22) on the front body.
・Tighten three screws (#66)
and two screws (#1514).
・Attach the SCM-change SCM-change
lever(#383) and tighten the r(#383) and tighten the (#383) and tighten the
screw (#387).
＜ Caution ＞
After mounting the bayonet, press the lens-release
pin and confirm that it does not get stuck.
Oil barrier: OS-30MEL
※ Apply to the inside of each area
so that the grease is not forced out.
#B382
#406
#405
#402
- Ａ  ・
#992
Oil barrier: OS-30MEL
#38×2
#407
#22
#66
#66
#401
#90
-
logo Q0310 forGraphic
070509 Gdesign ito
INC
VBA20001-R.3720.A
#40
#37
#1514
#387
#66
#383
#1514
#1621×4
#1620