Laundry Guide - Kenmore 110.4708* Use And Care Manual

Auto Temp Control
ATC (Auto Temp Control) electronically senses and maintains a
uniform water temperature. ATC regulates incoming hot and cold
water. The ATC is automatically turned on when a cycle is
selected. (See "Preset Cycle Settings" in "Cycles.")
Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available to each of these
washer cycles.
CYCLE SUGGESTED LOAD TYPE
Normal/Casual Normally soiled blouses, shirts, overalls,
etc., made of polyester, nylon, cotton, linen,
or cotton blends
Heavy Duty Heavily soiled underwear, towels, shirts,
etc., made of cotton
Whitest Whites Soiled white fabrics
Sanitary Heavily soiled underwear, towels, work
clothes, diapers, etc.
Rinse/Drain & All loads
Spin
Clean Washer No clothes
Silk/Ultra Silk or Ultra Delicate fabrics identified as
Delicate machine washable.
Handwash/Wool Woolens with a felt-free finish and special-
care items identified as machine washable.
Kids Wear Children's clothing or any fabric that
requires extra rinsing
Bulky/Bedding Normally soiled blankets and comforters
Express Wash Small loads of 2-3 lightly soiled cotton,
polyester, nylon, and cotton blends.
*Prewash and Soak cannot be selected at the same time.
ATC works for the wash temperature with Extra Hot, Hot,
Warm, and Cool settings.
The Cold wash temperature depends on the cold water at
your faucet.
ATC works for the rinse temperature where the wash temp
setting is marked with an asterisk, such as Warm*. All other
rinse temperatures are cold.

Laundry Guide

Delay Prewash/
Start Auto Soak*
AVAILABLE OPTIONS
Stain Save 2nd Rinse/
Treat Energy Skincare
Plus Rinse II
Extended
Spin
19