Positioning For User Transfer; Positioning For Use; Adjusting - Invacare Pronto M71 Jr. with SureStep Owner's Operator And Maintenance Manual

SECTION 6—ARMS

Positioning for User Transfer

1. Unlock the flip back armrest by pulling the armrest release lever into the up
(horizontal) position.
2. Pull up on the flip back armrest and remove the armrest from the front arm socket.
3. Continue to pull up on the flip back armrest until the armrest is out of the way.
4. Repeat STEPS 1-3 for opposite flip back armrest, if necessary.

Positioning for Use

1. Make sure the flip back armrest release lever is in the up (horizontal) position.
2. Install the flip back armrest into the front arm socket.
3. Lock flip back armrest by pressing flip back armrest release lever into the down
(vertical) position.
4. Lift up on flip back armrest to make sure the armrest is locked in place.
5. Repeat STEPS 1-4 for opposite flip back armrest, if necessary.

Adjusting

NOTE: For this procedure, refer to FIGURE 6.1.
1. Unlock top of flip back armrest by pulling height adjustment lever into the up
(horizontal) position.
2. Adjust top of the flip back armrest to the desired height.
3. Lock top of flip back armrest by pushing height adjustment lever into the down
(vertical) position.
4. Lift up on flip back armrest to make sure the armrest is locked in place.
5. Repeat STEPS 1-4 for opposite flip back armrest, if necessary.
Quick
Release Pin
Flip Back
Armrest Lever
FIGURE 6.1 Installing/Removing/Positioning/Adjusting Flip Back Armrests
® ™
Pronto M71 Jr. with SureStep
Flip Back Armrest
Height
Adjustment
Lever
Front Arm Socket
® 44
Locked
(Down - Vertical)
Unlocked
(Up - Horizontal)
Part No 1122147