SECTION 5—WHEELCHAIR OPERATION
SECTION 5—WHEELCHAIR
OPERATION
After ANY adjustments, repair or service and before use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
Set-up of the Electronics Control Unit is to be performed ONLY by a qualified
technician. The final adjustments of the controller may affect other activities of the
wheelchair. Damage to the equipment could occur if improperly set-up or adjusted.
Operating the Wheelchair
Turning the Power On/Off
NOTE: For this procedure, refer to FIGURE 5.1.
1. To turn the power On, perform one of the following steps:
JOYSTICK
MPJ™+
SPJ™+
2. Turning the power Off can be achieved by performing one of the following steps:.
JOYSTICK
MPJ+
SPJ+
®
™
Pronto
M71
Jr. with SureStep
WARNING
Move the On/Off switch Forward to the On position.
Press the On/Off button.
Move the On/Off switch Back to the Off position.
Press the On/Off button.
SPJ+ Joysticks
On/Off
Button
FIGURE 5.1 Turning the Power On/Off
®
30
ACTION
ACTION
MPJ+ Joystick
On/Off
Switch
Part No 1122147