Table of Contents
Advertisement
Review this chart to find do-it-yourself
solutions for minor performance
problems. Any service
needed, other than those described
in this owner's manual, should be performed
at a Sears
service center.
!
WARNING
Electrical
Shock Hazard
Disconnect
electrical
supply before
servicing
or cleaning the unit. Failure
to do so could result
in electrical
shock
or personal
injury.
PROBLEM
Cleaner will
not run.
Poor job of dirt
pickup.
POSSIBLE CAUSE
1. Unplugged at wall outlet.
2. ON-OFF switch not turned on.
3. Tripped circuit breaker/blown
fuse at household service panel.
.
2.
3.
4.
POSSIBLE SOLUTION
1. Plug in firmly. Push ON-OFF
switch to ON.
2, Push ON-OFF switch to ON.
3. Reset circuit breaker or replace
fuse.
Full or clogged dust bin.
Broken belt.
2.
Clogged hose or nozzle.
3.
Hose not inserted fully.
4.
1. Empty dust bin.
Replace belt.
Clean hose or nozzle area.
Insert hose.
5. Worn agitator.
6. Hole in hose.
7. Dust bin assembly
improperly installed.
5. Replace agitator.
6. Replace hose.
7. Properly install dust bin assembly.
8. Belt not installed on motor shaft.
8. Install belt on motor shaft.
Dust escapes
1. Dust bin assembly
1. Properly install bin.
the dust bin.
improperly installed.
Light will
1. Burned out light bulb.
1, Replace light bulb.
not work,
18
Advertisement
Table of Contents
