Table of Contents
Advertisement
Check
primary
filter frequently
and clean
when dirty. Remove
the dust bin assembly
as outlined
in the DUST BiN CLEANING
section
and empty contents
of dust bin.
Make sure dust bin is empty
before filter is
removed.
Grasp filter screen,
rotate
counter-clockwise
and lift out.
Lid_
Filter
Scree/1
Grasp
primary
filter, rotate counter-
clockwise
and lift out. Clean primary
filter
by genfiy tapping
over a trash container.
Tap on several sides to ensure
best
cleaning.
(Rinse with water only as
needed)
The fitter may be cleaned
by
tapping
it on a firm surface
or by rinsing
it
under a faucet.
Rinse with water only, do not use detergent
or soap. Allow filter to dry 24 hours
before
putting
it back into the dust bin.
When the cleaning
of the filter no longer
restores
vacuum
suction
to full power you
need to replace
the filter.
Before replacing the primary filter it is a good
idea to clean the inside of the dust bin and lid
area.
_._
_
AIIgnment
I
Rotate filter clockwise
until slots lock onto
tabs in lid.
To re-install
the filter screen,
align tabs on
filter screen with tabs on lid.
Tabs
Alignment
Tabs
Rotate filter screen clockwise to lock in
place.
12
Advertisement
Table of Contents
