power cord from wall outlet. Clean
using a clean, soft cloth that has
in a solution
of mild liquid
and water and wrung
DO NOT drip water on cleaner and wipe
dry after cleaning.
DO NOT clean tools in dishwasher
Wash tools in warm soapy
rinse and air dry.
DO NOT use tools if they are wet.
The hose located on the vacuum
the dirt from the nozzle up to the
If the hose should
Unplug vacuum. Remove hose coupling
and check hose coupling and hose inlet for
clogs. Check suction inlet and secondary
filter screen for clogs.
Disconnect wand from connector pipe and
nozzle hose, check the wand and hose.
Plug in vacuum cleaner and turn on.
wand and stretch hose in and
out to remove
clog. If clog still exists, turn
OFF and UNPLUG
CORD. Turn vacuum
area for clogs.