Overall System - JTS US-902D Pro Instruction Manual

3. Specification

3-1 Overall System

RF Frequency Range................
Oscillation Type..........................
Channels...........................................
Audio Frequency Response
Band-width......................................
Operation Range.........................
3-2 Receiver
Receiver Model......................
Frequency Preparation......
Carrier Frequency Range
S/N Ratio....................................
T.H.D..............................................
Display............................................
Display Contents....................
Controls........................................
Audio Output Level.............
AF Output Impedance.......
Squelch..........................................
Operation Voltage.................
Output Connector................
Dimension(m/m)................
502~960 MHz
PLL Synthesized Control OSC
16 Channels (US-902D Pro / US-9216 Series)
64 Channel (US-903DC Pro / US-9364 Series)
50~18,000Hz
24 MHz
100M
US-902D Pro / US-9216 Series
PLL Synthesized Control
502~960 MHz
> 105dB
<0.6%@1KHz
LCD
Channel, Antenna A/B,
RF/AF Level Meter
Power On/Off,
Channel Up/Down,
Squelch Level, Audio Leve
-12dB
600Ω
Pilot Tone, Noise and Mute
12-18 VDC, 300mA
2 Balanced XLR Sockets
1 Unbalanced Ø6.3mm Phone jack
420(W)* 45(H)* 232(D)
US-903DC Pro / US-9364 Series
PLL Synthesized Control
502~960 MHz
> 105dB
<0.6%@1KHz
LCD
Group/Channel, Antenna A/B,
RF/AF Level Meter
Power On/Off,
Channel Up/Down,
Squelch Level, Audio Level,
Lock-on
-12dB
600Ω
Pilot Tone, Noise and Mute
12-18 VDC,900mA
2 Balanced XLR Sockets
1 Unbalanced Ø6.3mm Phone jack
420(W)* 45(H)* 232(D)
2