JTS US-902D Pro Instruction Manual page 18

US-903DC Pro / US-9364 Series
1. Selecting group channel:
Step 1 Group set up:
Step 2 Channel set up:
2. Setting Lock-On:
2-1 Press "SET" button two sec. repeat pressing till "
ton to lock-on mode and "DOWN" button to lock-off mode. Re-press "SET" button
the lock function will store.
2-2 To release the Lock-On mode. Press "SET" button two sec. till "
then press "DOWN" button till "
relieved.
3. Setting procedure is the same between channel A & B.
4. Channel A & B can't be set up in the same group and frequency, the system will avoid this
problem automatically.
5. The lock-on or lock-off is effective on both A and B simultaneously.
15
WIRELESS MICROPHONE SYSTEM
Press "SET" button two sec. till the "
press the Up or Down button to select a suitable group from the pre-set
four group of " , , , and ". Then, press "SET" to store the group.
Then the channel number is flashing, press the Up or Down button to
select a suitable channel from the pre-set 16 channels.
After step Step 1 & Step 2, again press "SET" button the receiver will store the
setting automatically.
" show up, then "A-1" starts flashing,
" appeares. Press "UP" but-
" appears, press "SET" again then lock-on
" show up,