Switching On; Warning: Calibration Requirement; Emc Conformance - Raymarine ST60+ Owner's Handbook Manual

81262_2.book Page 25 Friday, November 11, 2005 11:11 AM
Chapter 3: Installation

3.3 Switching on

Switch on the power to your ST60+ instrument. When the power is on, you can
use the depth button to switch the instrument on and off as described in
Chapter 1, Operation
Use the procedures in
how you want them
.

WARNING: Calibration requirement

To ensure this product performs at its best on your boat, you
MUST calibrate it before use, in accordance with the instructions
Chapter 4, Calibration
in
successfully calibrated it.

EMC conformance

Always check the installation before going to sea to make sure that it is not
affected by radio transmissions, engine starting etc.
.
Chapter 1, Operation
to set the backlighting and contrast
Do NOT use the product until you have
.
25