Using The Reset Button - Arris Touchstone CM900 User Manual

Getting
Safety Started
CM900A
Ethernet
10/100/1000 Reset
Reset Button
Ethernet
10/100/1000 Reset
CM900S
Installation

Using the Reset Button

Use the Reset button, on the back of the Cable Modem, to reset the modem as if
you power cycled the unit. You may need to reset the Cable Modem if you are hav-
ing problems connecting to the Internet. Using this button will be rare.
Use a pointed non-metallic object to press this button. The photo to the left shows
the location of the Reset button. The Reset button is recessed to prevent acci-
Cable
dental resets.
Model CM900S only: The rear panel power switch can also be used to power cycle
the unit.
Power Switch
Cable
Touchstone CM900 Cable Modem User's Guide
Ethernet
Configuration Usage Troubleshooting Glossary
39