Blind Hem; Starting To Sew - Kenmore 385.19365 Owner's Manual

Blind Hem
O Stitch pattern: 21
® Thread tension dial: AUTO
G: Blind hem foot
Starting to sew
[] How to hold the fabric
O Wrong side of fabric
® 5/32"- 1/4" (&4-0o7 cm)
[] Sewing technique and guide setting:
When the needle comes to the left hand side,
position the fabric so that the folded edge comes to
the left side of the guide, Lower the presser foot,,
Adjust the position of needle swing with the stitch
width key so that the needle just pierces the folded
edge of the fabric when the needle comes to the left
side, Sew guiding the folded edge along the guide,
® Wrong side of fabric
@ When the needle comes to right side
® When the needle comes to left side
® Guide
O Guide screw
_) Fold edge
® Needle
[] Open the fabric after sewing
@ Right side of fabric
Note;
For a professional looking hem, try not let the needle
pierce more than 1/8" (0.2 cm) into the foldo
If the folded edge is pierced too far re left side, you can
not expect a good seam on the right side of the fabric.,
f
[]
[]
[]
\
®
@ ® ®
®
J
84