Delivery Inspection - Briggs & Stratton Home Generator Systems Operator's Manual

Delivery Inspection

Carefully inspect the generator for any damage that may have
occurred during shipment.
If loss or damage is noted at time of delivery, have the
person(s) making delivery note all damage on the freight bill
and affix his signature under the consignor's memo of loss
or damage. If loss or damage is noted after delivery, separate
the damaged materials and contact the carrier and your
installer for claim procedures. Parts damaged in shipping are
not warranted.
The generator is supplied with:
• Pre-attached mounting pad
• Fully-serviced oil/lubricating system
• Flexible steel fuel line
• Installation and start-up manual
• Operator's manual
• Spare access door keys
• Spare 15A ATO type fuse
• Two pin control panel connector
• Ten pin control panel connector
• Lifting hole plugs (4)
• LP conversion jet
• Battery tie-down strap
10
Not included:
• Carbon monoxide detector(s)
• Smoke detector(s)
• Starting battery
• Connecting wire and conduit
• Fuel supply valves/plumbing
• Crane, lifting straps, chains or cables
• Two 48" lengths of 1" pipe (not conduit)
• Torque screwdriver, 50 to 50 inch-pound range
• Voltage / Frequency meter