Sensor (Exit 1 Bin Full) Removal - Lexmark W850n Service Manual

Sensor (exit 1 bin full) removal

1.
Remove the rear RIP card cover. See
2.
Remove the rear motor cover. See
3.
Remove the top rear cover. See
4.
Open the printer left door assembly.
5.
Remove the standard exit top cover. See
6.
Open the printer front door assembly.
7.
Remove the front left cover. See
8.
Remove the exit 1 media shift assembly. See
9.
Release the hooks securing the sensor (exit 1 bin full) (A) to the exit 1 media shift assembly (B).
10.
Remove the sensor (exit 1 bin full) (A).
Hook
"Rear motor cover removal" on page
"Top rear cover removal" on page
"Printer front left cover removal" on page
Hooks
A
"Rear RIP card cover removal" on page
"Standard exit 1 top cover removal" on page
"Exit 1 media shift gear removal" on page
B
Left
4-125.
4-14.
4-4.
4-112.
4-3.
4-110.
Repair information
4024-110
4-109