XYZ Printing da Vinci 1.0 User Manual page 7

da Vinci 1.0 User Manual
Display Panel: information on printer status.
Key Pad: use to operate functions in the printer.
Extruder Module: to be used for printing 3D objects.
Z-Axis Rod: to be used to provide print-enabled lifting heated bed module.
Access Door: to be used for operating or maintenance.
Print bed: provides a fl at surface to lay the 3D model.
Cartridge Slot: space for placing the fi lament cartridge.
USB Port: used for connecting the USB cable.
Power switch: this switch turns on/off the power of the printer.
Power Connector: to be used to connect the power cord.
Attention
Once the 3D printer is turned off, wait at least 3 seconds before turning it on again.
PRINTING
．Cartridge Locker
．USB Cable
．User Quick Guide
． Scraper
．Glue Stick
．Filament Cartridge
． Copper Brush
． Cleaning Wire x5
．Decorative Plate x2
．Software CD
．Power Cord
P 7