Audio Menu Page 2 - Headphones; Audio Menu Page 3 - Outputs 1 And 2, And Host Source; Audio Menu Page 4 - Outputs 3 And 4 - Novation Ultranova User Manual

RE3: Input 2 Gain
Displayed as:
In2Gain
Default value: Off
Range of adjustment: -10 to +65
Adjusts input gain for Input 2 with Input Linking (RE1) set to Indept and for both Inputs 1
and 2 with Input Linking set to Stereo. Operation is otherwise identical to RE2.
RE4 to RE6: Not used.
COMPRES1 C1Ratio C1Thrsh C1Attack
RE7: Input 1 FX Send
2.0 -20
Displayed as:
In1~Fx
Default value: 0
Dst1Type Dst1Comp Dst1Lvl
Diode 100
Range of adjustment: 0 to 127
This parameter adjusts the amount of Input 1's signal sent to the FX processor for the cur-
Rvb1Type Rvb1Dec
rently selected Patch. If Input Linking is set to Stereo, it simultaneously adjusts the FX
LrgHall 90
send level for both Input 1 and Input 2.
Protect Local MidiChan MidiOut
Off On 1
Try scrolling through the factory Patches to experiment with the different FX
which they contain to see how different FX alter your input signal. Alternatively,
TuneCent Transpse KbdVel VelResp
0 0 Curve 4 Medium
try one of the Patches in the ExtInput category.
ClockSource Clock} 120 BPM
Auto Status} Internal Clock
DUMP to Bank Patch
RE8: Input 2 FX Send
USBport A 0 Init Program
Displayed as:
In2~Fx
DUMP to ^^
Default value: 0
USBport GLOBALS & AUDIO
Range of adjustment: 0 to 127
Calibrate BendWhl ModWhl
This parameter adjusts the amount of Input 2's signal sent for FX processing. If
Input Linking is set to Stereo, it simultaneously adjusts the FX send level for both Input 1
Current O/S Version 1.0.00
Current O/S Transmit ^^
and Input 2. Startup O/S Version 1.0.00
Audio Menu Page 2 – Headphones
In12Link In1Gain In2Gain In1 -60 |--------|
Indept Off Off In2 -60 |--------|
HeadPhones Level Control
Follow master volume (1+2 only)
OUTPUTS Synth Input1 Input2
1+2 127 0
RE1: Headphone level control select
Displayed as:
HeadPhones Level Control
OUTPUTS Synth Input1 Input2
3+4 0 127
Default value: Follow master volume (1+2 only)
Range of adjustment: SPDIF Follow master volume (1+2 only) or
Off
Use Level and Balance 1+2/3+4
With Follow master volume (1+2 only) selected, the level of the signal at the stereo
headphone socket [8] will be adjusted by the Master Volume control [29]. The Head-
Novation UltraNova
phone volume (RE6) and Headphone balance (RE7) controls will be inoperative. What
you hear in the headphones will be the same mix and balance as that being fed to Outputs
1 and 2. With Use Level and Balance 1+2/3+4 selected, the Headphone volume and
source blend may be adjusted independently by RE6 and RE7.
RE2 to RE5: Not used.
RE6: Headphone volume
Displayed as:
Level
Default value: 127
Range of adjustment: 0 to 127
This adjusts the headphone volume, when Use Level and Balance 1+2/3+4 is selected
by RE1.
RE7: Headphone balance
Displayed as:
Balance
Default value: 0
Range of adjustment: -64 to +63
When Use Level and Balance 1+2/3+4 is selected by RE1, the audio at the head-
phones socket is a mix of the signal at Outputs 1 and 2 (a stereo pair) and that at Outputs
3 and 4 (another stereo pair). Refer to the following menu pages for details on how to set
up Outputs 1 & 2 and 3 & 4.
RE8: Not used.
Audio Menu Page 3 – Outputs 1 and 2, and Host source
Outputs 1 & 2 may carry a mix of synth sounds, the audio sources connected at Inputs 1
and/or 2, and DAW channels 1 & 2. The default setting for the Output 1+2 mix is synth
sound at full level and no external audio, apart from any routed to the FX processor. The
MONITOR control [28] on the top panel provides a balance between DAW channels 1 & 2
and the mix of synth sound and audio inputs set up with RE3, RE4 and RE5.
The USB port can additionally send a further mix directly to a computer.
36
C1Rel C1Hold C1Gain
0 64 32 127
0
Touch/Filter
Off Set by Patch
DfltRate FootSwth Whlights
48KHz Auto On
Name Current OnePatch OneBank
Aftouch SetAftouch
0dB In1FX
0dB 0
Level Balance
127 0
RECORD Mode
0 Synth
Level Balance (Host3+4/Synth+Inps)
0 127 0
Indept Off
HeadPhones Level Control
Follow master volume (1+2 only)
OUTPUTS Synth
1+2 127
RE1: Not used, but LCD conirms that this page is concerned with Outputs 1 & 2.
OUTPUTS Synth
3+4 0
RE2: Synth level
SPDIF
Off
Displayed as:
Default value:
Range of adjustment:
RE2 adjusts the level of sounds generated by the synthesiser present in the mix at Outputs
1 and 2.
RE3: Input 1 level
Displayed as:
Default value:
Range of adjustment:
Audio from Input 1 may be mixed into Outputs 1 and 2 by adjusting RE3. With Input Link-
ing (RE1 on Audio Menu Page 1) set to Indept, RE3 adjusts level for Input 1 only. With
FX - COMPRESS 1/2 COMPRES1 C1Ratio
Input Linking set to Stereo, the level of both Inputs 1 and 2 will be adjusted as a pair.
2.0
RE4: Input 2 level
FX - DISTORT 1/2 D ISTORT1 Dst1Type
Diode
Displayed as:
Default value:
FX - REVERB 1/2REVERB1 Rvb1Type
Range of adjustment:
AllBanks
LrgHall
Audio from Input 2 may be mixed into Outputs 1 and 2 by adjusting RE4. With Input Link-
ing (RE1 on Audio Menu Page 1) set to Indept, RE4 adjusts level for Input 2 only. With
GLOBAL Protect Local
Off On
Input Linking set to Stereo, the level of both Inputs 1 and 2 will be adjusted as a pair.
TuneCent Transpse
0 0
RE5 and RE6: Not used.
ClockSource
Auto
RE7: Record Mode
DUMP to Bank
Displayed as:
In2FX
USBport A
0
Default value:
DUMP to
1+2/3+4 Range of adjustment:
USBport
In addition to the analogue outputs 1 to 4 and the S/PDIF digital audio output, a further
Calibrate
digital audio output is available via the UltraNova's USB port. This allows synth sounds
and/or audio inputs to be sent via USB direct to your computer audio application for re-
Current O/S Transmit
cording (or any other) purpose. RE7 lets you select whether this feed comprises just synth
sounds, just the signals at the audio inputs, or a mix of the two.
AUDIO In12Link In1Gain
Indept Off
RE8: Not used
HeadPhones Level Control
Follow master volume (1+2 only)
Audio Menu Page 4 – Outputs 3 and 4
OUTPUTS Synth
1+2 127
OUTPUTS Synth
3+4 0
SPDIF
Off
Outputs 3 & 4 may also carry a mix of synth sounds, the audio sources connected at
Inputs 1 and/or 2, and DAW channels 3 & 4. The default setting for the Output 3+4 mix
is no synth sound and external audio at full level. RE6 provides a balance between DAW
channels 3 & 4 and the mix of audio inputs and synth sounds set up with RE3, RE4, RE5
and RE6.
RE1: Not used, but LCD conirms that this page is concerned with Outputs 3 & 4.
RE2: Synth level
Displayed as:
Default value:
Range of adjustment:
RE2 adjusts the level of sounds generated by the synthesiser at Outputs 3 and 4.
RE3: Input 1 level
Displayed as:
Default value:
Range of adjustment:
Audio from Input 1 may be mixed into Outputs 3 and 4 by adjusting RE3. With Input Link-
ing (RE1 on Audio Menu Page 1) set to Indept, RE3 adjusts level for Input 1 only. With
Input Linking set to Stereo, the level of both Inputs 1 and 2 will be adjusted as a pair.
Off In2 -60 |--------|
Level
Input1 Input2
0 0
Input1 Input2 Level Balance (Host3+4/Synth+Inps)
127 0 127
Synth
127
0 to 127
Novation UltraNova
Input1
0
0 to 127
C1Thrsh C1Attack C1Rel C1Hold
-20 0 64
Dst1Comp Dst1Lvl
100 0
Input2
0
Rvb1Dec
0 to 127
90
MidiChan MidiOut Touch/Filter
1 Off Set by Patch
KbdVel VelResp DfltRate FootSwth
Curve 4 Medium 48KHz Auto
Clock} 120 BPM
Status} Internal Clock
Patch Name Current OnePatch
RECORD Mode
0 Init Program
Synth
^^
Synth, Inputs, Synth+Inputs
GLOBALS & AUDIO
BendWhl ModWhl Aftouch SetAftouch
Current O/S Version 1.0.00
^^
Startup O/S Version 1.0.00
In2Gain In1 -60 |--------|
Off In2 -60 |--------|
Level
Input1 Input2
0 0
Input1 Input2 Level Balance (Host3+4/Synth+Inps)
127 0 127
Novation UltraNova
Synth
0
0 to 127
Input1
127
0 to 127
0dB 0 0
Balance 1+2/3+4
127 0
RECORD Mode
Synth
0
C1Gain
32 127
Whlights
On
OneBank AllBanks
0dB In1FX In2FX
0dB 0 0
Balance 1+2/3+4
127 0
RECORD Mode
Synth
0