Table of Contents
Advertisement
Problem
My phone
beeped when I
attached the
data cable, but
my data
applications
do not work.
When sending
data with the
data cable,
why does the
computer
show a
connection
rate of 19200
Kbps?
I can't end my
data call by
closing the
application on
my computer.
What can I do?
Downloaded from
www.Manualslib.com
Solution
Some wireless networks may not
support data transmission. If you
are roaming on an unfamiliar
network, this may be the case.
Also, remember that data
transmission usually requires a
subscription. Call your service
provider for more information.
19200 Kbps is the data transfer
rate of the connection between
your computer and the phone in a
standard Circuit Switch Data
(CSD) connection. The rate of the
connection between your phone
and the network is displayed on
your phone, and will be either
14400 or 9600 Kbps.
Note: A GPRS connection may
have a higher data transfer rate.
Try pressing O on your phone.
Also try disconnecting the cable or
turning off the phone. If possible,
always close the connection
through your computer. These
alternative methods may disrupt
the application on your computer.
manuals search engine
191
Advertisement
Table of Contents
