Advertisement
Assembly Instructions
GB
Do not set the equipment up in rooms which are frequently used
■
or close to doors, entries etc.
It is not recommended to use or store the apparatus in a damp
■
room as this may cause it to rust. Please ensure that no part of
the machine comes in contact with liquids (drinks, perspiration
etc.). This may cause corrosion.
The surface on which the unit is placed must be firm and even.
■
Place rubber or straw mats under it to deaden any noise or im-
pacts. Only for appliances with weights. Avoid powerful oscil-
lations of the dumbbells!
The unit is designed for use by adults and children should not
■
Instructions for Assembly
The equipment must be assembled with due care by an adult
■
person. If in doubt call upon the help of a second person, if pos-
sible technically talented.
Ensure that you have received all the parts required (see check
■
list ) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
The fastening material required for each assembly step is shown
■
in the diagram inset. Use the fastening material exactly as in-
structed. The required tools are supplied with the equipment.
Please note that there is always a danger of injury when work-
■
ing with tools or doing manual work. Therefore please be care-
ful when assembling this machine.
Ensure that your working area is free of possible sources of dan-
■
ger, for example don't leave any tools lying around. Always dis-
pose packaging material in such a way that it may not cause
any danger. There is always a risk of suffocation if children
play with plastic bags!
List of spare parts
When ordering spare parts, always state the full item number,
spare-partnumber, the quantity required and the S/N of the pro-
duct (see spare parts drawing).
Example order: Art. no. 07752-600 / spare-part no. 10100016
/ 2 pieces / S/N......
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this
Instructions de montage
F
Lire attentivement les présentes instructions avant le montage et la première utilisation de l'appareil. Elles contiennent
des renseignements importants relatifs à la sécurité des personnes ainsi qu'à l'emploi et à l'entretien de la station d'en-
traînement. Conserver soigneusement lesdites instructions pour d'éventuels renseignements ainsi que pour effectuer
l'entretien de l'appareil ou commander des pièces de rechange.
Pour votre sécurité
L'appareil ne doit être utilisée que pour les fins auxquelles elle
■
est destinée, c'est-à-dire pour l'entraînement des adultes.
Tout autre emploi est interdit, voire dangereux. Le fabricant ne
■
pourra être rendu responsable de dommages causés par l'em-
ploi inadéquat de l'appareil.
4
be allowed to play with it. Children at play behave unpre-
dictably and dangerous situations may occur for which the
manufacturer cannot be held liable. If, in spite of this, children
are allowed to use the equipment, ensure that they are instruct-
ed in its proper use and supervised accordingly.
Basically this equipment does not need any special maintenance.
■
Do not use corrosive or abrasive materials to clean the equip-
■
ment. Ensure that such materials are not allowed to pollute the
environment.
Please keep original packaging of this article, so that it may be
■
used for transport at a later date, if necessary.
Before assembling the equipment, study the drawings carefully
■
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
Bolt all the parts together loosely at first, and check that they
■
have been assembled correctly. Tighten the locknuts by hand un-
til resistance is felt, then use spanner to finally tighten nuts com-
pletely against resistance (locking device). Then check that all
screw connections have been tightened firmly. Attention: once
locknuts have been unscrewed they no longer function correctly
(the locking device is destroyed), and must be replaced.
For technical reasons, we reserve the right to carry out prelimi-
■
nary assembly work (e.g. addition of tubing plugs).
For machines with rope systems: please ensure that all ropes are
■
fixed correctly. This is especially important for latissimus bars.
Waste Disposal: KETTLER products are recyclable. At the end of
■
its useful life please dispose of this article correctly and safely
(local refuse sites).
should be clearly stated on the order by adding the words „with
fastening material".
KETTLER GB Ltd. · KETTLER House, Merse Road · North
GB
Moons Moat · Redditch, Worcestershire B98 9HL
KETTLER International Inc. · 1355 London Bridge Road · VA
USA
23453, Virginia Beach
http://www.kettler.de
Vous vous entraînez avec un appareil dont la technique et la sé-
■
curité correspondent aux exigences modernes. Les sources pos-
sibles de danger qui pourraient entraîner des blessures ont été
soit supprimées, soit sécurisées.
Advertisement
