Network; Availability Of The Network Feature; Programming Features: Lan - Panasonic KX-MB2100 series Operating Instructions Manual

9. Network

9.1 Availability of the network feature

Important:
R The network feature (LAN or wireless LAN) may not be available for your unit. See "y List of available
features and equipment" on page 3 whether your unit has the feature.

9.2 Programming features: LAN

Feature
DHCP mode
IP address
Subnet mask
Default gateway
DNS server #1
DNS server #2
Machine name
MAC address
Bonjour
Network status
IP filtering
Auto IP
HTTPD
90
Code Description
#500 When this feature is activated, the following will be allocated
automatically using a DHCP (Dynamic Host Configuration Protocol)
server.
– IP address
– Subnet mask
– Default gateway
#501 To set the IP address for the LAN connection. This feature is available
when feature #500 is deactivated.
#502 To set the Subnet mask for the LAN connection. This feature is
available when feature #500 is deactivated.
#503 To set the default gateway for the LAN connection. This feature is
available when feature #500 is deactivated.
#504 To set the primary DNS server for the LAN connection. This feature
is available when feature #500 is deactivated.
#505 To set the secondary DNS server for the LAN connection. This feature
is available when feature #500 is deactivated.
#507 To set the machine name.
Enter the name of the unit to recognize on the LAN, up to 15
characters, using the English alphabet and numbers.
R The first and last letter must be an English alphabet or numbers.
R Hyphen can also be entered using M1N.
Note:
R In order to recognize the unit on the LAN, the default name of the
unit is assigned automatically. If you change the name, assign a
unique name to avoid overlapping.
#508 To display the MAC address of the unit.
#513 To set the Bonjour feature.
#526 To view the network status. See page 91 for details.
#532 When this feature is activated, the unit will deny/approve access from
the pre-programmed IP patterns. You can program whether to deny
or approve IP addresses. Up to 4 patterns each for IPv4 and IPv6 can
be programmed through the web browser interface (page 93).
#533 To set the IP address automatically for the LAN connection. This
feature is available when feature #500 is activated. When this feature
is activated, IP address will be allocated automatically without using
a DHCP (Dynamic Host Configuration Protocol) server.
#534 To set HTTPD for the LAN connection. When this feature is activated,
you can access to the web server.
Default
key
M1N
–
–
–
–
–
–
–
M1N
–
M0N
M0N
M1N