Panasonic KX-MB2100 series Operating Instructions Manual page 69

7.2.6 N in 1 feature
You can save paper by copying 2, 4 or 8 pages onto 1 page. The documents will be reduced to fit the recording paper.
N in 1
Original document
Page layout
("LANDSCAPE")
Page layout
("PORTRAIT")
1
Set the original.
2
Mo/PAGE LAYOUTN (repeatedly): "PAGE LAYOUT"
3
MCDN: "N in 1" A MOK/SETN
4
MCDN: Select the number of original documents. A MOK/SETN
5
MCDN: Select the desired layout. A MOK/SETN
6
If necessary, enter the number of copies (up to 99).
7
Start copying.
When using the scanner glass, press Mx/STARTN to scan the 1st page.
R To scan the next page, place the document and press MOK/SETN. Repeat this until all the documents are
scanned, then press Mx/STARTN.
When using the automatic document feeder (y), press Mx/STARTN.
Note:
R After you finish copying, press Mw/STOPN to reset this feature.
R You can save the previous page layout setting (feature #467).
R When the original document size and recording paper size are different, you can only make a 2 in 1, or 4 in 1
copied document.
For example, when using the 2 in 1 feature, you can copy 2 pages of an A5 size original onto an A4 size recording
paper.
7.2.7 Separate N in 1 feature (Scanner glass only)
You can separate an N in 1 copied document back into its original, separate pages. This feature is available for
documents created using the 2 in 1 and 4 in 1 settings.
Separate N in 1
Original document
("LANDSCAPE")
"2 in 1"
"2 in 1"
"4 in 1"
"4 in 1"
7. Copying
"8 in 1"
69