Panasonic KX-MB2100 series Operating Instructions Manual page 71

3. If "1" is selected in step 5, the unit will start copying.
R You can press Mx/STARTN anytime to start copying.
R For multiple copies, press Mx/STARTN to start copying.
If "ALL" is selected in step 5, press Mx/STARTN to start copying.
When using the automatic document feeder (y): Mx/STARTN
Note:
R After you finish copying, press Mw/STOPN to reset this feature.
R Multiple copies will be collated automatically.
R You can save the previous page layout setting (feature #467).
R A4, letter, legal, 216 ´ 330 or 216 ´ 340 size recording paper (plain and thin) can be used for this feature.
R The unit may store the documents into memory at a reduced resolution if "ALL" is selected in step 5 or more than
1 copy is set to be collated in step 7. When the memory becomes full while storing, if "1" is selected in step 5, the
unit will print out only the stored pages. If "ALL" is selected in step 5, the unit will cancel the printing.
7.2.9 Edge feature
You can set the unit not to copy the outer edges of the document without reducing the copied documents to fit the
recording paper. This is useful for copying documents with dirty edges.
1
Set the original.
2
Mo/PAGE LAYOUTN (repeatedly): "EDGE"
3
MCDN: "ON" A MOK/SETN
4
MCDN: "LONG EDGE" A MOK/SETN
5
Enter the long edge width using the dial keypad. A MOK/SETN
6
MCDN: "SHORT EDGE" A MOK/SETN
7
Enter the short edge using the dial keypad. A MOK/SETN
8
If necessary, enter the number of documents (up to 99).
9
Mx/STARTN
Note:
R After you finish copying, press Mw/STOPN to reset this feature.
R This feature and page layout features cannot be used at the same time (except for N in 1).
R You can hold the previous edge setting (feature #473).
7.2.10 Margin feature
You can set the unit not to copy a particular edge of the document to make a margin. This is useful for binding the
copied documents.
1
Set the original.
2
Mo/PAGE LAYOUTN (repeatedly): "MARGIN"
3
MCDN: "ON" A MOK/SETN
7. Copying
71