Panasonic KX-MB2100 series Operating Instructions Manual page 40

3. Basic Operations
Feature
Beep sound
Job end
notification
FAX ring count
Automatic Caller
ID list
Time adjustment
Handset receiver
volume setup
All address book
erase
Paper size in the
standard input
tray
40
Code Description
#165 To set the beep sounds and keytones. If you wish to hear
confirmation/error beep sounds and keytones, activate this feature.
Note:
R Even if this feature is deactivated, the unit beeps in some cases.
For example:
– the front cover is opened.
#174 To set the unit to alert you with a beeping sound after a print job is
finished.
Note:
R This setting is valid for the following:
– PC printing
– Automatic report/list printing during fax transmission (y)
– Printing received faxes (y)
R When a printing error occurs, the unit will beep the error beep
instead of this beep, even if this feature is activated.
#210 To change the ring count in FAX ONLY mode.
Note:
R If you are using the unit with an answering machine, set to more
than 4 (page 78).
R For EU models users:
If you change the location setting (feature #114), the ring count
will be reset to "2". If necessary, select the desired ring count
again.
#216 When this feature is activated, the unit will print the Caller ID list
automatically after every 30 new calls.
#226 Using this feature, the unit's date and time setting will be automatically
adjusted when caller information is received.
Note:
R If the time has not previously been set, Caller ID will not adjust the
clock.
R If the time is not adjusted correctly due to a problem in Caller ID
service, this feature is turned OFF.
#275 To select whether to return the handset receiver volume automatically
to the lowest volume level each time you hang up, or to keep the
selected handset volume level for the next phone call.
#289 To erase all items stored in the address book.
R Disconnect the following cables before activating this feature.
– Telephone line cord (fax supported models only) (y)
– USB cable
– LAN cable (LAN supported models only) (y)
#380 To set the recording paper size in the standard input tray.
Note:
R If any of the following paper sizes is selected, received fax
documents will be stored in memory (fax supported models only).
(y)
– "B5(JIS)"
– "B5(ISO)"
– "16K"
R If you have set feature #147 to "INCHES", the numbers are
displayed in inches.
Default
key
M1N
M0N
M2N
M0N
–
M1N
–
–