Answering System - Panasonic KX-TG7841BX Operating Instructions Manual

Answering system

Problem
The unit does not record new
messages.
I cannot operate the answering
system remotely.
The unit does not emit the
specified number of rings.
Bluetooth PIN
Problem
I cannot remember the PIN.
TG7841BX_UE(en)_0528_ver011.pdf
Cause/solution
R The answering system is turned off. Turn it on (page 48).
R The answering system does not answer or record calls
from cellular lines.
R The message memory is full. Erase unnecessary
messages (page 49).
R The recording time is set to "Greeting only". Change
the setting (page 54).
R If you subscribe to a voice mail service, messages are
recorded by your service provider/telephone company,
not your telephone. Change the unit's number of rings
setting or contact your service provider/telephone
company (page 53).
R The answering system will not answer incoming calls
while:
– the base unit or handset is on a cellular call or an
intercom call.
– a headset is in use.
Caller information is recorded in the caller list.
R The remote access code is not set. Set the remote
access code (page 52).
R You are entering the wrong remote access code. If you
have forgotten your remote access code, enter the
remote access code setting to check your current code
(page 52).
R The answering system is turned off. Turn it on (page 53).
R You cannot operate the answering system when calling a
cellular phone paired to the base unit.
R If the first ring is turned off, the number of rings decreases
by 1 from the specified number of rings.
Cause/solution
R Change the PIN using the following method.
1
MMENUN#619
2
*7000
3
Enter the new 4-digit PIN. a MOKN
4
Enter the new 4-digit PIN again. a MSAVEN a MOFFN
65
Useful Information
65
2013/05/28 18:56:50