Voice Mail Service For Landline - Panasonic KX-TG7841BX Operating Instructions Manual

Voice mail service for
landline
Voice mail is an automatic answering service
offered by your service provider/telephone
company. After you subscribe to this service,
your service provider/telephone company's
voice mail system answers calls for you when
you are unavailable to answer the phone or
when your line is busy. Messages are
recorded by your service provider/telephone
company, not your telephone. Please contact
your service provider/telephone company for
details of this service.
Important:
R To use the voice mail service provided by
your service provider/telephone company
rather than the unit's answering system,
turn off the answering system (page 48).
For details, see page 53.
Storing the voice mail (VM)
access number
In order to listen to your voice mail messages,
you must dial your service provider/telephone
company's voice mail access number. Once
you have stored your voice mail access
number, you can dial it automatically
(page 55).
Handset
1
MMENUN#331
2
Enter your access number (24 digits
max.). a MSAVEN a MOFFN
Note:
R When storing your voice mail access
number and your mailbox password, press
MDN (Pause) to add pauses (page 19)
between the access number and the
password as necessary. Contact your
service provider/telephone company for the
required pause time.
TG7841BX_UE(en)_0528_ver011.pdf

Voice Mail Service for Landline

Example:
1-222-333-4444
VM access
number
To erase the voice mail access
number
Handset
1
MMENUN#331
2
Press and hold MCLEARN until all digits
are erased. a MSAVEN a MOFFN
Listening to voice mail messages
The unit lets you know that you have new
voice mail messages in the following way:
– "New Voice Mail" is displayed if
message indication service is available.
Important:
R Voice mail indications may not be shown
depending on voice mail services of your
service provider/telephone company.
Handset
1
MMENUN#330
R The speakerphone turns on.
2
Follow the pre-recorded instructions.
3
When finished, press MOFFN.
Note:
R In step 1, you can also press MVMN
listen to new voice messages.
*1 MVMN is displayed if a cellular phone is
not paired and there are new messages
in the voice mail.
Base unit
To listen to voice mail messages, you have to
dial your voice mail access number manually.
Note for handset and base unit:
R If the handset and base unit still indicate
there are new messages even after you
have listened to all new messages, turn it
off by pressing and holding # until the
handset or base unit beeps.
55
PPPP 8888
Pauses Password
*1
to
55
2013/05/28 18:56:49