Panasonic KX-TG7841BX Operating Instructions Manual page 16

Link to Cell
connection from other Bluetooth devices
(cellular phone or headset). To
automatically resume the connection to
cellular phones, leave the auto connection
on.
R Some cellular phones lose connection after
usage, please check the specifications of
your cellular phone for more details.
Handset
1
MMENUN#632
2
MbN: Select the desired setting.
3
MSAVEN a MOFFN
Note:
R Some cellular phones may ask you if you
accept the connection requirement from the
base unit. In that case, select "Off" in step
2. Check the specifications of your cellular
phone.
Connecting/disconnecting the
cellular phone manually
If you will not be using the paired cellular
phone's link to cell feature temporarily (for
example, you do not want the unit to ring
when your cellular line receives a call), you
can disconnect your cellular phone from the
base unit. If you want to use it again,
reconnect the cellular phone to the base unit.
Note:
R Even if a paired cellular phone was
disconnected from the base unit, if it is
brought within the base unit's range during
the auto connection interval, it may
automatically connect to the base unit
(page 15).
R A disconnected cellular phone is not
unpaired from the base unit, so pairing it to
the base unit again is unnecessary.
Handset
1
To connect/disconnect:
For CELL 1: MMENUN#6251
For CELL 2: MMENUN#6252
R A long beep sounds.
2
MOFFN
16
TG7841BX_UE(en)_0528_ver011.pdf
Cellular line only mode (If you do
not use the landline)
If you do not use the landline, we recommend
setting the unit to the cellular line only mode.
Important:
R If you turn on the "Cell line only
mode", disconnect the telephone line cord
from the base unit. Otherwise the "Cell
line only mode" cannot be activated.
Handset
1
MMENUN#157
2
To turn on:
MbN: "On" a MSELECTN a
MbN: "Yes" a MSELECTN
To turn off:
MbN: "Off" a MSELECTN
Note:
R Once you set this mode, you can use the
following buttons to make cellular calls:
– for the handset, press M
– for the base unit, press MZN instead of
R Once you set this mode, the following
features cannot be used:
– Landline features (page 37)
– Answering system (page 48)
– Voice mail features (page 55)
R After this mode is turned on or off, the base
unit reboots.
– Bluetooth connections from cellular
–
When you use the landline again
Before connecting the telephone line to the
base unit, select "Off" in step 2, "Cellular line
16
instead of MCELLN (page 18).
the line button (MCELL 1N or MCELL 2N)
set for the cellular line selection
(page 17, 24).
Messages cannot be received.
phones or headset are disconnected. If
the auto connection is turned on
(page 15), the cellular phones are
reconnected.
will be displayed on the handset
momentarily. The handset can be used
once is displayed.
N or MZN
2013/05/28 18:56:47