FAQ's Guide (for Australia)
L Connect the AC adaptor and telephone line cord and charge the batteries for about 7 hours before
initial use.
L Please read this FAQ's Guide before using the unit and save for future reference.
Telephone
Question
What should I do when noise is
heard, sound cuts in and out?
Why is there no dial tone?
(cellular line)
Question
How do I answer the 2nd call
when I am talking with someone?
How can I use the call waiting
service?
Model No.
Frequently asked questions
Cause/solution
L You are using the handset or base unit in an area with
high electrical interference. Re-position the base unit and
use the handset away from sources of interference.
L Move closer to the base unit.
L If you use a DSL/ADSL service, we recommend
connecting a filter (contact your DSL/ADSL service
provider) to the telephone line between the base unit and
the telephone line socket. Contact your DSL/ADSL
provider for details.
L Make sure that the CELL 1 or CELL 2 indicator lights up
and the cellular phone is connected to the base unit.
L The cellular phone has not been paired to the base unit.
Pair the cellular phone.
Cause/solution
L Press {CALL WAIT}, and then 2 while on the 1st call,
this will switch to the 2nd call, press {CALL WAIT} and
then 2 again to alternate between calls or return to 1st
call, or press {CALL WAIT} and then 1 to terminate the
current call.
L Call waiting is a service provided by your service
provider/telephone company. For additional information
on the use of this service, contact your service provider/
telephone company.
KX-TG7882AZ/KX-TG7883AZ
KX-TG7892AZ/KX-TG7893AZ
Need help?
Do you have a question about the KX-TG7882AZ and is the answer not in the manual?
Questions and answers