Liquid Damage - Panasonic KX-TG7841BX Operating Instructions Manual

Useful Information

Liquid damage

Problem
Liquid or other form of moisture
has entered the handset/base
unit.
Caution:
R To avoid permanent damage, do not use a microwave oven to speed up the drying process.
Registering a handset to the base unit
1
Handset:
MMENUN#130
2
Base unit:
Press and hold MLOCATORN for about 5 seconds until the registration tone sounds.
R The next step must be completed within 90 seconds.
3
Handset:
Press MOKN, then wait until a long beep sounds.
Deregistering a handset
1
MMENUN#131
2
MSELECTN
3
MbN: "Yes" a MSELECTN
4
MOFFN
66
TG7841BX_UE(en)_0528_ver011.pdf
Cause/solution
R Disconnect the AC adaptor and telephone line cord from
the base unit. Remove the batteries from the handset and
leave to dry for at least 3 days. After the handset/base
unit are completely dry, reconnect the AC adaptor and
telephone line cord. Insert the batteries and charge fully
before use. If the unit does not work properly, contact an
authorized service center.
66 2013/05/28 18:56:50