Using A Bluetooth Wireless Headset (Optional) For Landline Calls - Panasonic KX-TG7841BX Operating Instructions Manual

Using Bluetooth Devices
2
To store "International": #117
To store "Country code": #118
To store "National access":
#119
3
Enter the desired number. a MSAVEN
4
MEXITN
Note:
R After you copy the entries, confirm that the
numbers were transferred correctly.
Using a Bluetooth wireless
headset (optional) for
landline calls
By pairing a Bluetooth headset to the base
unit, you can have a hands-free conversation
wirelessly for landline calls.
Important:
R 1 headset can be paired to the base unit.
However, only one Bluetooth device
(cellular phone or headset) can be
connected to the base unit at a time.
R For best performance, we recommend
using a Bluetooth headset within 1 m
of the base unit. A headset can
communicate with the base unit within a
range of approximately 10 m.
Pairing a headset to the base unit
Important:
R Make sure that the Bluetooth headset is not
connected to any other Bluetooth device.
1
Your headset:
Set your headset to pairing mode.
R Refer to the headset operating
instructions.
2
Handset:
MMENUN#621
3
If your headset PIN is "0000", go to
step 4.
If your headset PIN is other than
"0000", press MCLEARN, then enter your
headset PIN.
46
TG7841BX_UE(en)_0528_ver011.pdf
R Typically, default PIN is "0000". Refer
4
Press MOKN, then wait until a long beep
sounds.
5
MOFFN
R When
Connecting/disconnecting a headset
If you cannot connect the headset and base
unit using the headset, you can connect using
the unit.
To use your headset with another Bluetooth
device such as a cellular phone, you may
need to disconnect it from the base unit.
Important:
R Make sure that the headset is turned on.
Handset / Base unit
1
To connect/disconnect:
MMENUN#622
R A long beep sounds.
2
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Unpairing a headset
You can cancel a pairing of the headset that is
stored to the base unit.
Handset
1
MMENUN#612
2
MbN: "Yes" a MSELECTN
R When the headset is unpaired, the
3
MOFFN
Operating a Bluetooth wireless
headset using a landline
Important:
R Refer to your headset operating instructions
for headset operations.
46
to the headset operating instructions.
is displayed on the base
unit, the headset is available for use.
disappears from the base unit
display.
2013/05/28 18:56:49