Sony PCS-1 System Integration Manual page 62

Fixed IP Address for PPPoE: Blank
PPPoE DNS:
Primary DNS:
Secondary DNS:
2. Confirm that the IP address displayed in the launcher menu of teleconference terminal B is
210.20.20.2.
3. The LAN setup menu of teleconference terminal A is set as described below.
DHCP Mode:
Host Name:
IP Address:
Network Mask:
Gateway Address:
DNS Address:
Gatekeeper Mode:
Gatekeeper Address:
User Alias:
User Number:
SNMP Mode:
Trap Destination:
Community:
Description:
Location:
Contact:
NAT Mode:
NAT Address:
Packet Resend Request: ON
Adaptive Rate Control: ON
LAN Mode:
Port Number Used:
TCP Port Number:
UDP Port Number:
TOS:
PPPoE:
PPPoE User Name:
PPPoE Password:
Fixed IP for PPPoE:
Fixed IP Address for PPPoE: Blank
PPPoE DNS:
Primary DNS:
Secondary DNS:
4. Confirm that the IP address displayed in the launcher menu of teleconference terminal A is
192.168.10.10.
5. Enter LAN in the phone book of teleconference terminal A for a line I/F, IP address 210.20.20.2 of
teleconference terminal B in it for an IP address, and other required items. After that, register
teleconference terminal B in the phone book and initiate a call. Or set LAN for a line I/F and IP
address 210.20.20.2 of teleconference terminal B for an IP address by Dial, and then initiate a call.
3-12
Obtain automatically
Cannot be set.
Cannot be set.
Off (Set to "Auto" when a router has a DHCP server function. Setting is not
required from "IP address" to "DNS address" when "Auto" is set.
Enter any name.
Local IP address (192.168.10.10)
255.255.255.0.
192.168.10.1
Blank
OFF
Blank
Blank
Blank
OFF
Blank
public
Videoconference Device
Blank
Blank
ON
210.10.10.1
Auto Nagotiation (This mode is changed to a proper mode when mismatching
occurs in the mode. Refer to "4-2. PCS-1/1P and Hub setting".)
Default (Set to "Custom" when a port number is specified by the network
administrator.)
2253 (Enter the port number specified by the network administrator when
the port number used is set to "Custom".)
49152 (Enter the port number specified by the network administrator when
the port number used is set to "Custom".)
OFF
OFF
Blank
Blank
OFF
Obtain automatically
Cannot be set.
Cannot be set.
PCS-1/1P