Sony PCS-1 System Integration Manual page 20

11. Set the following items on LAN.
LAN Setup Wizard
DHCP Mode
Host Name
IP Address
Network Mask
Gateway Address
DNS Address
Previous
DHCP mode:
Sets DHCP (Dynamic Host Configuration Protocol).
AUTO:
Acquires an IP address, network mask, gateway
address, and DNS address automatically.
OFF:
Sets DHCP to "OFF". Enter an IP address, network
mask, gateway address, and DNS address when you
set DHCP to "OFF".
Host name:
Enter a host name.
IP address:
Enter the IP address of this unit.
Network mask:
Enter a network mask.
Gateway address:
Enter a default gateway address.
DNS address:
Enter a DNS (Domain Name System) server address.
n
The automatically acquired IP address can be
confirmed in a launcher menu or information menu
when the "DHCP mode" is set to "AUTO".
Consult the network administrator when you cannot
understand the method of setting on LAN.
12. Press the ↑, ↓, ←, and → buttons of a remote
controller and click the "Next" button. Press the Enter
button.
A confirmation message is then displayed.
1-16
Auto
. . .
. . .
. . .
. . .
Next Cancel
13. Press the ↑, ↓, ←, and → buttons of a remote
controller and click the "Save" button. Press the Enter
button.
Previous
The setting is then saved.
To stop the setting
Press the ↑, ↓, ←, and → buttons of a remote controller
and click the "Cancel" button. Press the Enter button.
To return to the preceding wizard
Press the ↑, ↓, ←, and → buttons of a remote controller
and click the "Return" button. Press the Enter button.
Save
Cancel
PCS-1/1P