Remote Motion Picture At Each Point In Split Mode - Sony PCS-1 System Integration Manual

4-5-3. Remote Motion Picture at Each Point in Split Mode

The images in all connected terminals are split and simultaneously displayed in all terminals.
1. The number of split images is 4 when sub-terminals are 1 to 3. The position of the images is fixed in
the order of connection. Examples at four points are given below.
(Note: Sub-devices A to C are the order of connection.)
Remote image in main and sub-terminals
Image in
sub-device A
Image in
main device
2. The number of split images is 6 when sub-terminals are 4 and 5. The position of the images is fixed
in the order of connection immediately after connection.
(Note: Sub-devices A to E are the order of connection.)
Remote image in main and sub-terminals immediately after connection
Image in
sub-device A
Image in
sub-device D
Image in
sub-device E
3. The image of a speaker moves to the lower-right position when he or she speaks during six-image
splitting.
The image in a main terminal moves to the speaker terminal position when the previous image
displayed in the lower-right position is one in the main terminal.
When the previous image displayed in the lower-right position is one in a sub-terminal, it returns to
the position immediately after connection. The image in a main terminal moves to the speaker
terminal position. Instead, the image in a main terminal moves to the speaker terminal position.
PCS-1/1P
Image in
sub-device B
Image in
sub-device C
Image in Image in
sub-device B sub-device C
Image in main device
4-7