Download  Print this page

Advertisement

Operation log using commercial PC (2)
When PCS-1/1P is connected to LAN, a log can be extracted from PCS-1/1P using telnet with PC
connected to LAN.
Even when PCS-1/1P is not connected to LAN, a log can be extracted from PCS-1/1P using telnet by
connecting the 100BASE-TX/10BASE-T terminal on the rear panel of PCS-1/1P and the LAN terminal
of PC directly using a LAN cross cable.
First, connect PCS-1/1P and PC to LAN, or connect them directly using a cross cable and set LAN of IP.
After that, transmit ping from PC to PCS-1/1P and confirm that a reply is returned from PCS-1/1P.
(1) Click "Command prompt" from "Start menu".
2-10
PCS-1/1P

Advertisement

Table of Contents

This manual is also suitable for:

Pcs-1p

Comments to this Manuals

Symbols: 0
Latest comments: