Ricoh Aficio DSc428 Installation And Operation Manual page 147

• When using [Top Slant], [Left 2] or [Top 2] with Combine, Double copies or
Auto Reduce / Enlarge function, "
orientation.
inals and paper you placed. In this case, change the paper orientation.
• When [Left 2] or [Top 2] is selected, the following settings are useful to rotate
images appropriately:
• Auto Reduce / Enlarge or Auto Paper Select
• With image rotation in Auto Tray Switching of User Tools
• If you select Saddle Stitch function with the booklet finisher, the machine
staples and folds the paper in the centre, then delivers the paper folded.
• If you select Saddle Stitch function in Magazine or Booklet mode, the ma-
chine staples the paper, and folds it like a book, then delivers the paper
folded.
❖ ❖ ❖ ❖ Punch
• When using Punch and Combine, Double Copies, or Auto Reduce / En-
large, the message "
may appear because of the orientation of the original and the copy paper.
If this occurs, change the orientation of the copy paper.
• Since punch holes are made in each copy, the punch hole positions vary
slightly.
• Punchable paper sizes are as follows:
2 tray finisher
Punch kit type
2 & 4 holes type
4 holes type
2 & 3 holes type
"message may appear depending on the orientation of orig-
Blank part will appear. Check orientation.
L
2 holes
K
L
4 holes
K
4 holes L
K
L
2 holes
K
L
3 holes
K
Supplementary Specifications
Blank part will appear. Check
A3-B5 JIS, 11" × 17"
" × 11"
1
A4-A5, 8 /
2
A3, B4 JIS, 11" × 17"
" × 11"
1
A4, B5 JIS, 8 /
2
A3-B5 JIS, 11" × 17"
" × 11"
1
A4-A5, 8 /
2
A3-B5 JIS, 11" × 17"
" × 11"
1
A4-A5, 8 /
2
A3, B4 JIS, 11" × 17"
" × 11"
1
A4, B5 JIS, 8 /
2
"
6
133