Adjust Colour Image - Ricoh Aficio DSc428 Installation And Operation Manual

Note
❒ If you select [No] :
• When memory becomes full,
the machine stops operation,
allowing you to remove the
copies on the output tray.
❒ If you select [Yes] :
• You can leave the machine
unattended to make copies,
but sorted pages will not be
sequential.
❒ Default: No
❖ ❖ ❖ ❖ Select Stack Function
Specify whether Stack or Rotate
Sort has priority on the initial dis-
play.
Note
❒ Default: Stack
❒ An 2 tray finisher or booklet fin-
isher is required to use this
function.
❖ ❖ ❖ ❖ Select Stapling Position
Specify which Top 2 staples or Bot-
tom shown on the initial display
with priority.
Note
❒ Default: Top 2
❒ The 2 tray finisher or booklet
finisher is required to use this
function.
❖ ❖ ❖ ❖ Letterhead Setting
If you select [Yes] for this function,
the machine rotates images cor-
rectly.
Note
❒ Default: No
❒ Orientation-fixed (top to bot-
tom) or two-sided paper might
not print correctly depending
on how the originals and paper
are placed.
Settings You Can Change with User Tools
Reference
When using letterhead paper,
pay attention to the paper orien-
tation. See "Orientation–Fixed
Paper or Two-Sided Paper" in
"Loading Paper", General Set-
tings Guide.

Adjust Colour Image

❖ ❖ ❖ ❖ Background Density of ADS(Full Col-
our / Two-colour)
The background density is adjust-
ed to skip the texture and copy.
You can adjust the background
density up to 5 levels when in Full
Colour or Two-colour.
Note
❒ Default: Centre of the 5 level ad-
justment
❖ ❖ ❖ ❖ Colour Sensitivity
You can adjust the tone of red in
"Two colour (Red & Black)", the
colour specified to convert in "Col-
our Convert" and the colour speci-
fied for "Erase Colour", in 5 levels.
Note
❒ Default: Centre of the 5 level ad-
justment
❒ When the colour width has been
set to "Wider", and the colour to
be deleted, for example is red,
all the colours that are close to
magenta and orange are delet-
ed. If it's set to "Narrower" the
colour red will be deleted.
❖ ❖ ❖ ❖ A.C.S. Sensitivity
This 5-step setting determines the
level of the standard used for dis-
criminating between black & white
originals and full colour originals
when "Auto Colour Select" is se-
lected.
5
123