Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Intellinet 550437
Summary of Contents for Intellinet 550437
- Page 1 PRO SERIES Mini Speed-Dome Camera Hardware Installation Guide Model 550437 (NTSC) Model 550451 (PAL)
-
Page 2: Package Contents
INTRODUCITON Thank you for purchasing this INTELLINET NETWORK SOLUTIONS™ Pro Series High-Speed Dome Network Camera. This user manual includes instructions concerning the hardware installation of the camera. Networking experience will be helpful when setting up and using this product. Updated versions of this document will be posted to www.networkipcamera.com as they... -
Page 3: Installation
INSTALLATION CONNECTIONS Connecting the Ethernet / Power cable Camera Connection Connect the video output of the camera to the video input of a monitor or other equipment. When using a "loop through" connection of two or more monitors, set the 75Ω switch of only the final monitor to 'On'. Determine the type of cable according to the distance of the connected equipment. - Page 4 Connecting the camera to a PC or a network There are two ways to connect the camera to a local network. Connection to a PC using cross-over Ethernet cable Connection to a local area network (LAN) using standard Ethernet cable ETHERNET DIRECT CABLE...
- Page 5 Once the camera is connected to a computer or local network, follow these steps to set the required IP address. 1. Insert the supplied CD into your CD ROM drive. 2. Double-click on the utility folder in the CD-ROM drive. 3.
- Page 6 Assigning IP address statically (recommended) Check the “Static IP address” option and fill in the IP, Default Gateway, Subnet Mask, DNS1 and 2 and Web port fields. Click “Change Network Configuration” to save the changes. Assigning IP address by DHCP Check the “Dynamic IP Address (via DHCP Server)”.
- Page 7 Accessing the camera through the Internet Once installed, the camera is accessible on your local network (LAN). To access the camera from the Internet, the network router must be configured to allow incoming traffic. By default, the following ports need to be opened and forwarded to the camera: Web Server Port 80, Video Server Port 50001 and Control Server Port 52000.
- Page 8 Installation on the Ceiling (Flush Mount) As shown bellow, make a φ40 mm After passing the cables through hole on the ceiling panel to pass the the φ40 hole in the ceiling cable and drill three φ3 mm hole at panel, fix the main body to the position designated.
-
Page 9: Wall Mount Installation Using Wall Mount Bracket
Wall Mount Installation using Wall Mount Bracket As shown bellow, make a φ60 mm After passing the cables through hole on the wall to pass the cable the wall mount bracket, fix the wll and drill 4 holes for wall mount mount bracket on the wall with bracket screws. -
Page 10: Specifications
SPECIFICATIONS Mini High-Speed Dome Camera (550451) MPEG4/M-JPEG, CCD, Day/Night, Audio, PAL Standards • IEEE 802.3 (10Base-T Ethernet) • IEEE 802.3u (100Base-TX Fast Ethernet) General • Supported image resolutions: 720 x 576, 640 x 576, 720 x 288, 640 x 288, 352 x 288, 176 x 144 •... - Page 11 Mini High-Speed Dome Camera (550437) MPEG4/M-JPEG, CCD, Day/Night, Audio, NTSC Standards • IEEE 802.3 (10Base-T Ethernet) • IEEE 802.3u (100Base-TX Fast Ethernet) General • Supported image resolutions: 720 x 480, 640 x 480, 720 x 240, 640 x 240, 352 x 240, 320 x 240 •...
- Page 12 INTELLINET NETWORK SOLUTIONS™ offers a complete line of active and passive networking products. Ask your local computer dealer for more information or visit www.intellinet-network.com Copyright © INTELLINET NETWORK SOLUTIONS All products mentioned are trademarks or registered trademarks of their respective owners.
Need help?
Do you have a question about the 550437 and is the answer not in the manual?
Questions and answers