Intellinet NSC15 Quick Install Manual
Hide thumbs
Also See for NSC15:
- User manual (112 pages) ,
- User manual (115 pages) ,
- Quick start manual (5 pages)
Related Manuals for Intellinet NSC15
Summary of Contents for Intellinet NSC15
- Page 1 NSC15 Network Camera quiCk iNStall guide Model 524421 INT-524421-QIG-1008-04...
- Page 3 CD enclosed with this product; 2) on the Web site listed below; or 3) in some cases, printed and enclosed with this product. Contact your INTellINeT NeTWoRK SolUTIoNS dealer with comments or questions, or visit www.intellinet-network.com for information on the latest software and firmware updates, related products and additional contact information.
-
Page 4: Mounting Bracket
hardware Camera As identified below, the camera components, indicators and connections are self-explanatory except for the recessed Reset button, which can be 1) pressed (with a common pin or similar pointed object) and released to reboot the camera when it’s powered on, or 2) pressed and held in for 10 seconds to revert to factory default settings. -
Page 5: Installation
Software Installation 1. With your computer on, insert the included software Cd in the Cd-RoM drive. The setup screen will display automatically. 2. From the IP Camera Installation Menu, select “Intelligent IP Installer” and follow the subsequent on-screen instructions. Accessing the Camera Using Intelligent IP Installer 1. - Page 6 Both defaults are “admin.” Click “OK.” 4. If you’re accessing the NSC15 Network Camera for the first time, a yellow information bar will appear below the address bar with the message “This website wants to install the following add-on..” Click the information bar, then select “Install ActiveX Control.”...
- Page 7 2. Select a language, then click “OK.” The Web interface will automatically change to that language. Viewing Camera Images through a Mobile/Cell Phone There are three ways you can view your NSC15 Network Camera images by using a mobile/cell phone: • For 3G mobile/cell phone viewing, enter “rtsp://<IP>:<PORT>/video.3gp” into your 3G Web browser, where <IP>...
- Page 8 5. Use your existing account to log in to MSN Messenger. 6. Add the new MSN Messenger account (e.g., “camera at home”) to your contact list. 7. The NSC15 Network Camera will camera at home says: send you a message with its public IP and private IP if “IP Notification”...
-
Page 9: Accessing The Internet
Accessing the Internet Internet connectivity for the NSC15 Network Camera can be established by inputting the camera’s IP information in the Information section. Go to the camera’s Setting screen, then → Basic → Network → Information. PPPoe Connectivity Internet connectivity for the NSC15 Network Camera can be established through PPPoE (Point- to-Point Protocol) by inputting the username and password from your ISP (Internet service provider) in the PPPoE section. - Page 10 Connectivity Internet connectivity for the NSC15 Network Camera can also be established if your router is UPnP (Universal Plug and Play) enabled. The camera is automatically detected and added to “My Network Places” on your computer. NOTE: Only home routers manufactured after 2006 support the UPnP function.
- Page 12 INTELLINET NETWORK SOLUTIONS ™ offers a complete line of active and passive networking products. Ask your local computer dealer for more information or visit www.intellinet-network.com. Copyright © INTELLINET NETWORK SOLUTIONS All products mentioned are trademarks or registered trademarks of their respective owners.
Need help?
Do you have a question about the NSC15 and is the answer not in the manual?
Questions and answers