Do Not Disturb; Caller Id - Cisco SPA 514G User Manual

1228 + Number
(122801635555555)
1229

Do not disturb

The following Feature Access Codes are available and can be initiated from your Cisco SPA 514G
Feature Access Code
126
127
124
125

Caller ID

The following Feature Access Codes are available and can be initiated from your Cisco SPA 514G.
Feature Access Code
1470 (+number)
141 (+number)
#21 (+number)*
#22#yy (+number)*
#23 (+number)
In the cases where a subscriber has subscribed to always display the Caller ID by default, it is possible to
restrict Caller ID on a per-call basis, by dialling 141 followed by the target number.
Users activate this feature by dialling a Feature Access Code (FAC) to initiate an outbound call from the
Company number, the FAC for this is #23#01234567890*, where 01234567890 is the target number to
be dialled.
Example: Sam wishes to call an existing business contact, he simply dials 01202445566. This will present
his own Caller ID to the target caller.
Example: Olivia wishes to call a new customer from the company main number. She dials
#23#01202445566, the call receiver will see the Generic main number as the Caller ID in this case.
It is also possible to force a company number to be presented for selected list of users so that all their
outgoing off-net calls will only present the Main company number.
Version 2.1
Activates Call forward unavailable to the Number specified, if your phone is
turned off all incoming calls will go to the number entered.
Removes Call forward unavailable to Voicemail, if your phone is turned off then
ALL incoming calls will get a number not in use tone and drop, they will not go to
voicemail.
Behaviour
Activates Do not disturb for the phone you're calling from.
De-activates Do not disturb for the phone you're calling from.
Activate Do not disturb for both your mobile and fixed line phones.
De-activates Do not disturb for both your mobile and fixed line phones.
Behaviour
Present my Caller ID on a per call basis (used when you number is normally
withheld).
Withhold my Caller ID on a per call basis (used when you number is normally
presented).
Per call dial out with Multi-user hunt group number (user's terminal belongs to
unique Multi-user hunt group).
Per call dial out with Multi-user hunt group number where a user belongs to more
than one Multi-user hunt group – yy is the two-digit number associated with the
Multi-user hunt group.
Per call dial out with Company Number.
32 of 33