Chapter 4 - Using Advanced Phone Features; Setting Up Privacy And Security Features; Blocking Anonymous Calls; Locking Your Phone - Cisco SPA 514G User Manual

Chapter 4 – Using advanced phone features
This chapter shows you how to set up and use advanced features on your Cisco SPA 514G IP phone, and
contains the following sections:
 Setting up privacy and security features
 Creating and using speed dials
 Customising your LCD screen
 Using ringtones
 Changing the date and time
 Restarting your phone
 Viewing phone, network and call information
 Using FAC codes

Setting up privacy and security features

Blocking anonymous calls

You can choose to block calls from unknown numbers coming through to your phone. Anyone who calls
you from an unknown number will hear a busy signal or pre-recorded message.
To block anonymous calls:
1. Press the Setup button.
2. Scroll to 'Preferences' and press 'select'.
3. Scroll to 'Block Anonymous Call'.
4. Press the 'edit' key followed by the 'y/n' key to turn block anonymous calls to 'Yes'.
5. Press 'ok' and then 'save'.

Locking your phone

Locking sensitive phone features using the logout feature
You can lock access to the sensitive features of your phone such as the directory and call lists when you
are not close to your phone. If this feature is setup, a padlock icon will appear in the top right corner of the
screen to indicate whether your phone is locked or unlocked.
To change the password for unlocking your phone and switch this feature on:
1. Press the Setup button.
2. Scroll to 'Set Password' and press 'select'.
3. Enter the current password (if the device is already locked) and enter the new password using the
keypad.
4. Press 'save'. The password will be updated and the phone placed in the unlocked state.
Note: To later remove the phone lock feature after it has been set up, simply change the password back
to the default value (blank).
Version 2.1 26 of 33