Unpacking And Inspection - Eltek Valere Theia He-t User Manual

2.4. Unpacking and Inspection

To avoid damage to people and equipment the next instructions must be followed to unpack
and lift the inverter safely.
2.4.1. Shipping Damage
The THEIA HE-t inverters are thoroughly checked and tested in accordance with international
standards and approvals prior to dispatch. They are carefully packed before shipping.
However, if any damage to the inverter is found when delivered, please provide feedback to
your local Eltek Valere representative immediately!
2.4.2. Lifting and Carrying the Inverter
Considering the inverter's weight of 20-22 kg / 44–49 lbs. (depending on model), lifting and
carrying the inverter must be correctly performed to prevent back injuries.
Figure 2.4.1: Correct lifting of the inverter
2.4.3. Unpacking
Unpack the inverter as follows:
• Place the box in position, with the top clearly visible and according to the arrow markings
on the packaging.
• Cut the seal, and open the box.
• Take out the lock clip, the bag with accessories and the Installation Guide lying on the
upper section of the foam packaging material.
• Remove the upper part of the foam packaging material.
• Both sides of the inverter case are narrowed in order to get a
better grip on the device. Lift up the inverter carefully out of
the box using the "handles" illustrated in Figure 2.4.2.
• Remove the lower section of the foam packaging and take out
the inverter mounting bracket.
• Store all the original packaging for possible later use.
After unpacking the inverter safely, check that all components
are present and in an undamaged condition.
8
• When lifting bend the knees and keep
the back straight.
• Lift carefully, hold the inverter close to
the body and let the leg muscles do the
work.
• Turn the whole body as one unit to avoid
twisting the lower back.
• Carry the inverter close to the body.
User Manual THEIA HE-t String Inverters
Figure 2.4.2: "Handles"
357115.013, Issue 1.0, 2011 March