Eltek Valere Theia He-t User Manual page 64

Low inverter
temperature(W/A)
Current / power limitation
(W/A)
Communication failure (A)
Fan failure (W/A)
Fuse fault (A)
Active power limitation
(W/A)
Reactive power
compensation (W/A)
Microprocessor fault
(W/A)
Ground current trip (A)
High AC voltage (A)
64
Low internal inverter
temperature
PV power exceeds
inverter rating
Internal communication
failure
Internal air circulation has
failed
One or more fuses or
circuit breakers are blown
Too high AC voltage, the
inverter stops feeding
power
User Manual THEIA HE-t String Inverters
this User Manual and the inverter is
shielded from direct sunshine
- Clean ventilation (See
Ventilation)
- Contact your distributor
- The inverter will try to start up
again when the temperature is
within the permissible range again
- Check if the ventilation is
sufficient, the minimum distances
are compliant with those stated in
this manual and the inverter is
shielded from direct sunshine
- Clean ventilation (See
Ventilation)
- If the inverter is in Shutdown, turn
off the AC side and then the DC
side. Wait for 30 seconds, then turn
on the AC side and then the DC
side
- If the fault persists, contact your
distributor
- Contact your distributor for
replacement
- Contact the system installer for
replacement
*
*
- If the inverter is in Shutdown, turn
off the AC side and then the DC
side. Wait for 30 seconds, then turn
on the AC side and then the DC
side
- If the fault persists, contact your
distributor
*
- The inverter will restart when the
voltage is within the permissible
range
- Check that the country settings
have been successfully set in Setup
> Grid Setup
- If the failure persists, contact the
system installer
357115.013, Issue 1.0, 2011 March
8.2.7.
8.2.7.