Eltek Valere Theia He-t User Manual page 55

Change the Country Settings
• From the Main Menu: Select Setup > Grid Setup > Country.
• Enter - Confirm.
• After 5 hours of feeding in power to the grid after installation the Installer password must
be used to change the country settings. The Installer password is avaialable for installers
and grid operators only by contacting Eltek Valere.
• The question "Change country settings?" appears in the display.
OK – Continue
Cancel - The operation is cancelled
• After the country settings are changed, the screen will return to the Grid Setup screen,
showing the new grid settings.
User Manual THEIA HE-t String Inverters
Up or Down - Select the respective country
Enter – Confirm
,
357115.013 Issue 1.0, 2011 April
55