Setting Local/Remote Authority; Led Indication - opticis IPKVM-310-ED User Manual

 Setting Local/Remote Authority
Note: You can use KVM (including an HID mouse and/or a keyboard, or a knob (or controller)) under
user's authority. You can access to the devices by a login with user ID and set user's authority to
Local or Remote state for purpose using Keyboard/Mouse. And you can see whether you can access
the devices on the display of monitors of a remote site.
3-state Slide Switch
♦
You can set user's authority to Local, Remote, or Console (L/R/C) on the 3-state Slide
Switch. "L" means Local state, "R" means Remote state, and "C" means Console state.
Console State means a state which you can select a Local or Remote state on an external
console switch. (Refer to "A.1 Externally Setting Local/Remote Authority")
 LED Indication
IPKVM-310ED has two (2) LEDs for Power and Authority status located on the front
♦ Power status LED (Red)
When power is applied, the red LED will be turned on.
♦ Authority status LED (Green)
If green LED turns on on the transmitter, IPKVM-310E is ready to use HID Mouse/Keyboard
and others (Knob, etc.) on the Local site. And also if green LED turns on the receiver,
IPKVM-310D is ready to use HID Mouse/Keyboard and others (Knob, etc.) on the Remote
site.
- 11 -