opticis IPKVM-310-ED User Manual page 34

Connect the console indicator (left image) to DIO terminal block of the reciver device by
using a cable (right image). And then, you can see the Local or Remote state of control
authority through LED indication on the remote site.
1) 2pin Terminal Block
Refer to below figures to know an method and order to 2pin terminal block
3) 3pin Terminal Block
Refer to below figures to know an method and order to 3pin terminal block
+3.3V
CTL1
GND
+3.3V
CTL1
GND
- 34 -