Supporting Video Resolutions For Input / Output; Application; System Requirements For Setup - opticis IPKVM-310-ED User Manual

 Supporting Video Resolutions for Input / Output (TBD)
IPKVM-310ED supports 3 kinds of resolutions and you have to fix one of them for same EDID. So
a group of Rxs and Txs must have same resolution to display videos of Txs on 16ch multi-screen
of Rxs.
♦ 1280x720p60
♦ 1280x1024p60
♦ 1920x1080p60
Note: Some PC resolutions may not be displayed properly.
 Application
♦ KVM
♦ Video Control room
♦ RCS/ROS
 Systems Requirements for Setup
♦ Hardware requirements
▶ You must have a HDMI graphic controller or card having a HDMI or DVI port in your PC or
any other equipment being used.
▶ It should support the maximum graphic resolution feature of displays to be connected.
▶ No special requirements for memory size, CPU speed and chipsets, if you've already
properly installed your HDMI graphic controllers or cards.
♦ Software requirements
▶ You need to check OS version of your PC or any other equipment being used. [TBD]
♦ Network requirements
▶ You may need Ethernet switch(L2 or L3) as a switching hub, Optical-Ethernet switch or
router for connecting multiple IPKVM -310EDs in Local intranet or Internet. And also it is
possible to communicate directly between one pair of IPKVM-310ED, point-to-point
connection. Network speed of each port of Ethernet switch requires 100/1000Mbps
- 6 -