opticis IPKVM-310-ED User Manual page 31

♦ If the color of each framework is green, it says that you can work with the transmitter.
Note.
▶ Green (available): You can work with the transmitter (Source) on the remote (receiver) site.
▶ Magenta (not available): You cannot work with the transmitter (Source) on the remote
(receiver) site.
There are two cases. One is that another user (receiver) uses it in HID KVM mode.
Another case is that the transmitter is worked in Local site. Refer to "Setting Local/Remote
Authority".
♦ You can insert device name to each transmitter (Eg. No 1 or Hitach16.)
Note: Before add the Tx IP, firstly insert the name to each transmitter.
 Refer to 3.4 ([PC] Remote Manager/Receiver Setting)
- 31 -